Home   |  Products   |  Profile   |  Contact   |  FAQ   |  Inquiry |  Email  |  Members 
SC Patch Cord   


Product Categories
Patch Cord
Connector & Ferrule
Fiber Cable
Equipment
Fiber-to-the-home
Order Form
  

SC Simplex or Duplex Patchcords

SC connectors features rectangular plug type housing, eliminates the need to rotate the plug housing and the resuling torque applied to the ferrule. We provide SC patchcords with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. We guarantee every patchcord is well polished, meets / exceeds the industry standard.

Features :

  • Compliant with ANSI, Bellcore, TIA/EIA, IEC Standards
  • Meet NTT SC Standard
  • Low Insertion Loss and High Return Loss
  • Pull-proof Design
  • 2.5mm Japanese-made Ceramic Ferrules
  • Simplex or Duplex Configuration
  • Fiber Diameter: 9/125um SM, 50/125um MM, 62.5/125um MM

Quality Assurance:

Insertion loss and Return loss Insertion loss is the lost associated with a mated connector pair. Return loss is defined as the ratio of light reflected at the mated connector pair over the incident light. Both the Insertion loss and Return loss are given in logarithmic scale. All patchcords are 100% tested for insertion loss and return loss.
Geometric Requirements An advanced non-contact interferometric technique (DORC) is employed to measure the geometric parameters of the polished enface. The key parameters include radius of curvature, fiber height, apex offset, fiber and ferrule roughness. Geometric requirements are important to maintain the physical contact between mated connectors.

Specifications:

Classification
Singlemode
Multimode
Polish
APC
UPC
PC
Insertion Loss (dB)
< 0.3
< 0.3
< 0.3
Return Loss (dB)
> 65
> 50
---
     
Key geometric property
Minimum
Nominal
Maximum
Radius of Curvature
10mm
15mm
25mm
Apex Offset
0µm
0µm
50µm
Fiber Height (Planar)
-10
0
200
Fiber / Ferrule Roughness
0
0
20
Home   |  Products   |  Profile   |  Contact   |  FAQ   |  Inquiry |  Email  |  Members